47-6 Tie Replacer

Welded construction I-beam side members with tubular cross members.

36,040 lbs

Caterpillar C7.1 rated at 250 hp @ 2200 rpm

Puller Head: 16,500 lbs. (73kN), Kicker: 14,000 lbs (62kN). Maximum extracting force (puller and kicker): 30,500 lbs (136kN).

14,000 lbs. (62 kN)

Hydrostatic drive. One two-speed hydraulic motor coupled to front end rear axle with direct chain drive. Travel speed is 30 mph.

5 inch diameter solid steel alloy axles driven by direct chain drive from hydraulic motor at front and rear.

28 inch diameter, one-piece cast steel wheels bolted to axle hubs, insulated or non-insulated. All wheels equipped with external individual brake shoes. Service brakes are air applied/ spring released. Emergency/parking brakes are spring applied/air released.

Puller head: 6ft., Kicker: 2 ft., Optional Flipper: 3 ft. The puller head rotates on a slewing ring to operate on both sides of the machine and can operate at a vertical angle of up to 55 degrees and a lateral angle up to 11 degrees.

24 volt DC negative ground, engine driven alternator. Color coded and numbered wiring.12 volt system optional.

Air compressor is engine oil lubricated, water cooled. System pressure is 120 psi. 613 cu. in. capacity air tank. Service brakes are controlled by a pressure reducing valve and the parking brakes by a manually operated dump valve.

Double pump drive with closed loop propel pump and two load sensing pressure compensated pumps for machine functions. Electric actuated proportional and non-proportional valves. Electric emergency pump for clearing machine. Hydraulic oil is filtered through a 100 mesh (145 micron) suction screen and a 10 micron return line filter.

Enclosed air conditioned cab with heater and pressurizer. Equipped with joystick and foot pedal controls. Full instrumentation.

Fuel: 120 gal., Hydraulic: 100 gal.

Tie kicker, pivoting gripper arm, rotating puller/inserter head allows working from either side without turning machine. Excellent visibility of both rails, puller/inserter head, and kicker.

Designs are available for 36 inch to 66 inch gauges.